2021 Kunz Engineering Rough Cut Mower AcrEase MR44B

2021 Kunz Engineering Rough Cut Mower AcrEase MR44B

Rough Cut Mower AcrEase Model MR44B

44" rough cut model with a non-commercial grade single cylinder electric start engine and manual clutch blade engagement. Works great behind an ATV for smaller acreage jobs or tight clearance conditions.

Features may include:

• 44" Cutting Width

• 19 HP Briggs & Stratton Engine

• Commercial Grade Deck Assembly

• 4 Tire Design

• Quick Single Crank Height Adjust System

• Height Adjustment Range From 2" to 8"

• Manual Clutch Blade Engagement

• Conservative 2" Diameter Sapling Rating

• Pull Directly Behind or Fully Offset to the Side of the Tow Vehicle.

• 19HP Briggs & Stratton Professional non-commercial grade single cylinder engine

• The blade spindles used on the AcrEase mowers are built out of heavy duty welded steel hubs, 30mm (1-3/16") steel shafts, machined steel blade holders and large sealed ball bearings.

• The cutting height can quickly and easily be adjusted from 2"-8" with the single crank height adjustment system.

• The main deck is built out of 8 GA (.164") thick steel with a 7 GA (.179") thick steel top plate for reinforcement. An additional 1/4" thick steel plate is welded in the blade spindle mounting location. The three layers of steel in the blade spindle mounting area add up to just under 5/8" thick.

• Unique twin blade design provides more of a mulch action that reduces the size of the clippings and reduces bunching.

• The blades are easily engaged by simply shifting a manual clutch lever.

• The tow bar features a farm clevis type connection. This system provides more degrees of motion than most types of hitching systems. This is necessary to prevent binding in rough uneven terrain.

• Large 3-1/4 gallon fuel tank that provides 3 to 3-1/2 hours of run time